Skip to main content

Lightweight Enhanced AR-15 Carbine Buffer Tube Assembly Mil Spec Diameter - 6 Position Carbine Buffer Tube, QD End Plate, Castle Nut, 3 oz Buffer, & Spring


Breek Arms is excited to offer a new lightweight all in one assembly at an extremely affordable price that contains all the components needed to mount a buttstock of your choice to an AR-15 rifle or M4 carbine.  This 6 Position Mil-Spec diameter tube (1.14") will function on any standard AR-15 Lower Receiver and accept any mil-spec diameter stock.  The tube will not fit any commercial sized stocks. The buffer tube is precision machined with grooves that reduce the overall weight while retaining structural integrity. The fluted design is lightweight, strong, functions great, and looks great!
This isn't jargon, it's actually ENHANCED... Here's how!
  1. High Powered Stainless Steel Buffer Spring (*see note below on which spring is right for you)
    • A high powered spring offers faster cycle rates and improved feeding reliability with an additional 1.2 lbs of forwarding force.
    • It is polished for smoother operation in the buffer tube and dampens that sound, especially helpful when running the firearm suppressed.
  2. Quick Detach Mount End Plate
    • Great position for attaching a sling
    • SRP for most companies with QD mounts can be between $9.99 - $29.99, we are including these at NO extra cost! We just swapped it out with those useless standard ones.
  3. Lightweight Buffer Tube
    • We milled as much material out without sacrificing integrity for a lighter weight buffer and an appealing look.
The 5 Piece Buffer Tube Assembly Kit includes all of the following...
Product Specs
Material: 6061 T6 Impact Extruded Aluminum
Finish: Hard Coat Anodized - Black
Style & Size: 6 Position Carbine Mil-Spec Diameter
Outer Diameter: 1.14 inches
Buffer Length: 3.25 inches
Buffer Tube Length: 7.5 inches (bottom of the tube), 7.25 inches (top of the tube)
Total Kit Weight: 8.9 ounces 
*Note: High power springs generally improve performance of carbine and shorter gas length systems due to those systems generally being 'over-gassed'. In longer gas systems such as mid-length or systems that have a smaller gas port or are 'under-gassed' in some way, then a regular power spring may be adequate or in some circumstances even perform better. Please take this into consideration when deciding what power spring to use in your system.
While it is up to you to decide which spring power will work best for your rifle, Breek Arms recommends the high power spring for most situations since it adds just a little extra and is not too extreme. In almost all cases either spring will work well, and it comes down to personal preference. At Breek Arms, we equip all of our rifles with the smoother higher power spring.
Labels:

Comments

Post a Comment

Popular posts from this blog

The WARHAMMER Ambidextrous Charging Handle by Breek Arms

BREEK ARMS The Breek  WARHAMMER  Ambi charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15. Easily grab on either side of the handle and you can quickly charge your rifle even with large gloves with the textured grooves that are cut into the latch handles. The low profile design keeps it slim and sleek looking without sacrificing functionality. Made entirely out of 7075 aluminum for added strength and durability! Material: 7075-T6 aluminum Finish: Type III hard-coat anodized Perfect replacement for any factory charging handle Latches are also 7075 aluminum Oversize ambidextrous release levers on both sides No gunsmith required Allows for one-handed manipulation Covers the back of the upper receiver to prevent gas from escaping and hitting your face
Post a Comment
Read more

Custom 16" 5.56 Complete Upper - Aero Upper, 16" BCA Barrel, Gas Block and Tube, Muzzle Brake

Custom 16" 5.56 Complete Upper - Aero Upper, 16" BCA Barrel, Gas Block and Tube, Muzzle Brake The Breek Arms complete AR15 223/556 16 " upper comes jam-packed with features that usually cost you a fortune in order to trick out the plain upper you may have purchased before. Our AR15 complete upper uses quality components that come from trusted companies. The upper comes equipped with a 16” Bear Creek parkerized 5.56 barrel and with a black nitride bolt carrier group to give you flawless function when operating. The upper receiver is from Aero Precision paired with a Breek Arms Handguard of your choice. In the front, you have a couple options for the muzzle device. Keep it open to lessen the recoil, or if you want to tame the sound simply twist on your optional BRK Blast Shield. Last but especially not least, the upper can be equipped with our famous WARHAMMER ambidextrous charging handle for easy one-handed manipulation. The upper can be placed on any type of mil-...
Post a Comment
Read more

The BreekArms WARHAMMER for AR-15

The BreekArms WARHAMMER AR-15 ambidextrous charging handle – Better Design, Better Price Tag The Breek Arms WARHAMMER AR-15 ambidextrous charging handle is a simple and affordable upgrade that will substantially increase the use of your AR-15, AR 300 BO, or AR-9. This is the perfect replacement for any factory charging handle. No gunsmith required. The standard charging handle on an AR-15 or AR-9 rifle or pistol is one of the easiest to replace. Simply pop the rear takedown pin and open up the upper receiver. Remove the bolt carrier group and standard charging handle. Then replace it with the new WARHAMMER dual-sided charging handle and push both the BCG and charging handle back in, close the upper receiver and push back in the rear takedown pin. Most “budget” charging handles coming out on the market are made of inferior 6061 aluminum. This is so important! Our QC has found that 6061 aluminum material is too soft and weak for the stress that a charging handle goes through. Lat...
Post a Comment
Read more